shadetree

if the oil pump seals can be replaced ?, then yes...rebuild it.

i just put a high lifter front disk kit on my '02 trx450fm/s project the other day. i tried the super atv version, it would not bolt up on the brake lines for me, so i went back to the high lifter brand, as i've used them in the past with no issues at all. super atv is good, if you can get everything to bolt up ?. and cheaper than high lifter by about 100 bucks.

yes, shift harness under bars. follow from switch, under bars, all the way under the dash.

update: got as far as i could just now. now i wait on fenders/plastics.

all the best members that made that site what it WAS !..is now here, me, fish, retro, trxtwofive0, and a few others made that site great, we know our honda's !..lol. i was there for over 10 yrs i believe it was ?, not much got by me that i could not answer. as wilson said above ^^^..they asked us for our input, we gave it..they did not like it, so, we said screw you and this site...you deal with the members that need help, we will go and make our own site..and to me..this site is the best on the net !. it has the smartest memebers, friendly memebers, helpful members any where you will look !. twodeep said it best above ^^^..the problem that site has now is..you got a million post that you have to go through just to find the correct answer from members there that '' claim '' they know what they are talking about ?..haha..ok..good luck with that. the best honda mechanics are right here !.

update: still no fenders yet from rocky mountain atv ?, but this also means no dreaded email saying they are refunding me either ?!..lol. i got a few parts in the other day, used exhaust system, starter from d&b electrical, and some push pins. i am always using my stash of push pins, so decided to stock up on them, got 400 fairly cheap off ebay. gonna head out to the shop today, get the exhaust cleaned up, painted, and installed. then i can install the fuel tank heat shield and fuel tank. i need to clean up the lower skid plate, get it painted and installed at some point. then all i can do is wait on the fender parts to come in, bolt it all together..and she'll be done !.

this past weekend i purchased and installed a 16x20 carport for me to park my truck under, and for my gf to park her '02 trx450fm/s i am building, here is a couple pics of it installed. i had the back side and left far corner out of level on the ground wise, so i had to block it up. was impressed that the company gave me enough sheet metal to bring all 3 sides to the ground.

welcome to the forums.

welcome to the forums john !.

i bought the b2100, fixed it, purchased a 4ft tiller, 4ft box blade, and just purchased a 3ft bush hog, yep..yer right, diesels sip that fuel !.

loosen the hubs on rear axle, the wheels will move in and out on the axle..will give you a better stance !.

does the headlights not work ?, it needs to be lit up for him to see the display.

@AKATV , he will want to see a couple pics of it lit up if it will light up ?. i pinged hm for ya :-).

now there is the response i was waiting on !..lol.

thank you !. i just knew you would love to see a mellow yellow from me !..lol.

pounded them out from the inside of frame eh ?..been there..done that.

i just got a kubota b2100 a few weeks ago, had to rebuild the hydrostat ?, very high dollar !..lol.

nice !. i've got a build thread in the custom section on a 2002 trx450fm/s going on right now, just waiting on fenders from honda.

you installed something backwards.i'll bank on this. pull it all back down, pull up the fich on partzilla, find your year, make, model, then scroll down the list, until you see transmission compare the pic to the way yours is ?, chances are..you got one or two gears facing the wrong way ?.

does not matter..it fit..lol. right out of the box, bolted right up, i bled the brakes, works great !. got the best caliber made..wilwood..does the super china atv have those ?..nope !..lol.

rocky mountian atv is my go-to source for oem parts.

i really don't think anyone truely knows ?, i know i don't !. but if i was gonna head out for a very long trip ?, i always take extra fuel with me..or at least let someone know where i'm headed ?., or have a friend ride with ya to tow you back ?..lol.

update: got the high lifter disk kit in today, installed it without one problem at all !. it all bolted up, brake lines fit without bending, stretching. got the tires mounted on rims, installed those. installed the oem snorkel, installed the oem stick stoppers. done for now until the fenders come in.

thank you for the update !.

the line only bolts back on one way, because the center bolt, next to the line that goes up, has a bend in it, and a bracket tab right next to the line. here is the pic's i just took for the left side.