Mac102004 429 Posted March 28, 2020 What are you guys using for penetrating oil? I like to have a large selection lol Kano Kroil Swepco 801 Swepco 808 PB Blaster WD40 Specialist PL-100 Liquid Wrench Honourable mention to Seafoam Deep Creep I like that but don’t have any handy. 2 Share this post Link to post Share on other sites
_Wilson_™ 6,591 Posted March 28, 2020 Kano kroil all the way! Funny thing is ... It smells like Lysol ... Share this post Link to post Share on other sites
SlammedRanger 1,559 Posted March 28, 2020 Deep Creep Never seen another one do what its capable of. Share this post Link to post Share on other sites
Fishfiles 20,147 Posted March 28, 2020 1) AeroKroil 2) Deep Creep 3) 3M 5 Way Oil Share this post Link to post Share on other sites
_Wilson_™ 6,591 Posted March 28, 2020 Never heard of sea foam deep creep around here.. I'll defiantly check on that one. Share this post Link to post Share on other sites
Fishfiles 20,147 Posted March 28, 2020 4 minutes ago, _Wilson_™ said: Never heard of sea foam deep creep around here.. I'll defiantly check on that one. Deep Creep is the best buy for the money , I can get it from $7.50 - $9.00 a can depending where I go , Kroil goes for $16 a can now days for the short can , Kroil is as good as any 1 Share this post Link to post Share on other sites
_Wilson_™ 6,591 Posted March 28, 2020 I'm kind of partial to Kano .... It's made here in Tennessee ... And i use it very sparingly ...and man yeah.... Kano is expensive !! 1 Share this post Link to post Share on other sites
Outnback 101 Posted March 28, 2020 (edited) To darn expensive but it works. Second choice is PB Blaster. I use Kano Kroil to clean and protect my rifle barrels. Much better than Hoppies #9. Can you say Weatherby 30/378 Mag. Edited March 28, 2020 by Outnback Share this post Link to post Share on other sites
PROV 1,443 Posted March 28, 2020 1 hour ago, Outnback said: To darn expensive but it works. Second choice is PB Blaster. I use Kano Kroil to clean and protect my rifle barrels. Much better than Hoppies #9. Can you say Weatherby 30/378 Mag. Yes I can say it and I can also say I saw one blow up the action at the range. Parts of it hit me 10' away. 1 Share this post Link to post Share on other sites
Outnback 101 Posted March 29, 2020 3 hours ago, PROV said: Yes I can say it and I can also say I saw one blow up the action at the range. Parts of it hit me 10' away. Holy Crap! Don't believe I have ever fired a weapon immediately after cleaning it with Kroil. I swab the barrel after firing it when the barrel is still warm, then put the weapon away. Always with the muzzle down, so any residual oils can drain out. Helps any crud from draining into the action area and gumming things up.... Been around long enough to know anything can happen.... Most malfunctions I've witnessed were due to miss loading ammunition...... Never say never ... Thanks for the Heads-up! Share this post Link to post Share on other sites
PROV 1,443 Posted March 29, 2020 Sorry for the misunderstanding but it wasn't the cleaning. I was just referring to your gun. He was shooting factory ammo and I'm convinced one cartridge was undercharged resulting in a pressure spike. You could hear the difference. 1 Share this post Link to post Share on other sites
Outnback 101 Posted March 29, 2020 2 hours ago, PROV said: Sorry for the misunderstanding but it wasn't the cleaning. I was just referring to your gun. He was shooting factory ammo and I'm convinced one cartridge was undercharged resulting in a pressure spike. You could hear the difference. Thanks Again ! 1 Share this post Link to post Share on other sites
Mac102004 429 Posted March 30, 2020 I just bought the can of Kroil, never tried it before. Can't find it anywhere up here, had it shipped in from McMaster-Carr. I think that large can was $22 USD so $30+ Canadian The Swepco 801 and 808 are about the best I've used, 801 being kind of general purpose and the 808 being the heavy duty if all else fails this should work, last resort penetrating oil, it's expensive, about the same as Kroil but much smaller can. PB Blaster I've used a lot but it STINKS something awful. Liquid Wrench is usually on sale and it seems to work pretty good. I've had good luck with the WD-40 Specialist, regular WD-40 is better than nothing but only just. The PL-100 I honestly know little about, haven't used it much. I'm kind of curious about some of these other brands mentioned here. I'd like to test a bunch of them. Thinking about maybe putting a bunch of bolts together and throwing them in a bucket of ocean water for a few months haha. 2 Share this post Link to post Share on other sites
Fishfiles 20,147 Posted March 30, 2020 I knew about Kroil alredy , but first seen it really work in action , when I was as service manger , guy was selling Kroil stopped by for a demo , he had a container full of rusted bolts with nuts on them , just as mac mentioned , he stood them up right and sprayed each one of the tip of the bolt with a different penetrant ,the Kroil was the only one the leaked thru the threads of the rusted nut and down the threads of the bolt , no other brand did it --- you know when you can see penetrants at work, spray some on a bolt that is not frozen up , work it couple of threads , tight and loose , then spray it again , a lot of times , you can unscrew the nut by hand after working it a bit back and forth with the juice on it 1 Share this post Link to post Share on other sites
_Wilson_™ 6,591 Posted March 30, 2020 ^^^ good point And anothing about thing about Kano .... Is .... It doesn't seem to burn off too fast when a torch is needed for just a tad more help .... Share this post Link to post Share on other sites
shadetree 5,969 Posted March 30, 2020 liquid wrench, reg wd-40, and rust penetrating from wd-40, i've tried pb blaster, dont like it, can't find kroil around here ?, fish said he'd send me some ?..lol. just stocked up on the brands i just listed today !. Share this post Link to post Share on other sites
Fishfiles 20,147 Posted March 30, 2020 7 hours ago, shadetree said: liquid wrench, reg wd-40, and rust penetrating from wd-40, i've tried pb blaster, dont like it, can't find kroil around here ?, fish said he'd send me some ?..lol. just stocked up on the brands i just listed today !. Shade , PM me your address , I just so happened to have bought two cans , I am going to send you one , you'll love it ---only thing wrong with it , is it always seems to run out of aero-soil and there is still some liquid left , no problem , ice pick in the can and drain it out into a container 1 Share this post Link to post Share on other sites
TBRider 1,411 Posted March 30, 2020 Ship2shore, fluid film, liquid wrench Share this post Link to post Share on other sites
jeepwm69 7,719 Posted March 30, 2020 Acetone and ATF works best, but is a PITA mess Kroil works good, but hard to find around here and expensive. PB Blaster is the only one that I can get locally, and it works pretty good. Wife HATES the smell of PB Blaster. A few months ago I bought an old Warn upright winch (8274) from a guy in NE Arkansas. We were up there shopping anyway, so we went by and picked it up in her newish Lexus. I was prepared with some old mattress pads to wrap the winch in so it didn't get her car dirty, but the guy had soaked it in PB Blaster when he removed it from the old truck it had been on, so we didn't get a block from his house before she tore into me about the smell. Luckily I had a buddy who lived close by, so I dropped it at his house and he brought it down in the back of his pickup when he came to visit. 4 2 Share this post Link to post Share on other sites
Wheeler 2,527 Posted March 30, 2020 KROIL for the WIN!!! 2 Share this post Link to post Share on other sites
Mac102004 429 Posted March 30, 2020 I took about a dozen 5/16 bolts and nuts today and sand blasted them, they were zinc coated or whatever it is. Going to drill a piece of flat bar tonight and put the bolts through it. Tighten them up and dump them in ocean water lol, I guess I'll torque them to 15-20ft-lbs so I have a reference point, have to look up actual torque spec for 5/16 UNF. I know similar tests have been done, seen it before on YT, just want to see first hand. 2 Share this post Link to post Share on other sites
shadetree 5,969 Posted March 30, 2020 8 hours ago, Fishfiles said: Shade , PM me your address , I just so happened to have bought two cans , I am going to send you one , you'll love it ---only thing wrong with it , is it always seems to run out of aero-soil and there is still some liquid left , no problem , ice pick in the can and drain it out into a container pm sent !. Share this post Link to post Share on other sites
Fishfiles 20,147 Posted March 30, 2020 1 hour ago, shadetree said: pm sent !. Package sent , arrival Wednesday , enjoy !!! 1 Share this post Link to post Share on other sites