CasperA 2 Posted April 9, 2020 Hi everyone, thanks in advance for much needed advice. I'm at wit's end with a 2013 420 Rancher FA ES. I'll appreciate your input. Share this post Link to post Share on other sites
jeepwm69 7,719 Posted April 9, 2020 Welcome aboard. What's going on with your 420FA? @Melatv is a whiz with these things, has helped me through some electrical gremlins on the 420's. Share this post Link to post Share on other sites
CasperA 2 Posted April 9, 2020 (edited) TX Jeep, the gearshift system. Sometimes it does shift and sometimesit doesn't. Cleaned the valve body, reduction gears, cleaned the es servo, checked all the sensors according to the workshop manual. According to one of the guys at a Honda workshop they replaced the valve body. It solved the ES issues on both bikes. Did somebody on the forum ever replace the valve body and did it help? By the looks of it it'll be bloody expensive. Edited April 9, 2020 by CasperA Share this post Link to post Share on other sites
jeepwm69 7,719 Posted April 9, 2020 I have not had any issues related to the valve body on the wife's AT. Does it try to shift and just not shift (does the shift motor try to turn when you get a missed shift)? Tossing parts at one of these could be expensive. Honestly the transmission actually shifts much like a regular ES, with a shift drum, gears, shift forks, and a shift spindle that is controlled by the shift motor. I don't really see how a valve body would affect that, but then again I don't completely understand how the DCT part of the transmission works either. As I understand it, the valve body actuates the dual clutches at the proper time, so perhaps a bad valve body would cause shifting issues in that regard, but I would think you could do an oil pressure test to rule out the valve body as the issue. Did you happen to download the factory service manual at the top of the page? Share this post Link to post Share on other sites
shadetree 5,969 Posted April 9, 2020 welcome to the forums, please start a tread in the correct section :-). Share this post Link to post Share on other sites
riverc 1,317 Posted April 10, 2020 Welcome to the forum! Share this post Link to post Share on other sites
_Wilson_™ 6,591 Posted April 10, 2020 welcome to ATVH. Share this post Link to post Share on other sites
TBRider 1,411 Posted April 10, 2020 Welcome to the site Share this post Link to post Share on other sites
Fishfiles 20,147 Posted April 10, 2020 Welcome to the forum >> Share this post Link to post Share on other sites
CasperA 2 Posted April 10, 2020 6 hours ago, Fishfiles said: Welcome to the forum >> Tx Share this post Link to post Share on other sites
retro 4,071 Posted April 10, 2020 Welcome to ATV Honda! Share this post Link to post Share on other sites
CasperA 2 Posted April 10, 2020 8 minutes ago, retro said: Welcome to ATV Honda! Tx Share this post Link to post Share on other sites
AKATV 839 Posted April 10, 2020 Hi and welcome to the forum! Share this post Link to post Share on other sites
shrade 197 Posted April 10, 2020 Welcome aboard sir! Share this post Link to post Share on other sites
Freedomflyer 1,895 Posted April 11, 2020 Welcome from Montana Share this post Link to post Share on other sites
CasperA 2 Posted April 11, 2020 55 minutes ago, Freedomflyer said: Welcome from Montana Tx Share this post Link to post Share on other sites
CasperA 2 Posted April 11, 2020 2 hours ago, Freedomflyer said: Welcome from Montana Tx Share this post Link to post Share on other sites