Leaderboard

What the he!!, since we are on cattle/water I was rounding some up last weekend out of some river pasture a buddy rents. Snapped a couple pics.

Hi Retro, yes I am using a oem Honda angle sensor. I will do what you said and get back to you asap. Thanks for your time trying to help me out.

Look at what the Dutch are doing to their farmers. The powers that be hate us and want as many of us gone as possible.

I might have to try this..... anyone here experimented with it? I have to admit I was impressed when he bends the screw.....

One ? Of the master cyclinders ? Did you mean calipers ?

Update on the bike! Dad has been quite busy with the brakes on the 450 and what a job he's doing. He has the brake pads and discs on now and the wheels are fitting as they should. He attempted to bleed the brakes today but unfortunately cannot seem to get any pressure build up, so we will have to troubleshoot that issue. I have lots of work to do on the plastics and mud guards in the coming weeks, as most of the clips that bolt it all together are damaged or missing completely. I finish work in a week so will have a bit more time to work on it🤞

I seen his post but the site wouldn't let me contact him without making a post. Thank you

Hi , welcome to ATVHonda --- @AKATV is the Dash Guru , I just hailed him for you

Hi Fredm21, Is the angle sensor that you installed an OEM Honda part? If not, replace the angle sensor with the original angle sensor that you removed and see if it shifts. The angle sensor must be OEM. If the angle sensor is OEM, then unplug the 5p connector plug from the ECM. Using a multimeter measure the DC volts between the Green wire and the Red/Yellow wire terminals inside that 5p plug on the wiring harness half of that connector (not the ECM, leave the ECM alone). Let us know if there is battery voltage measured between those two terminals or not. Then find two lengths of wire that you can use for jumper leads that are long enough to reach from the battery to that 5p connector. Attach one jumper wire to the positive post on the battery and the other jumper wire on the negative post of the battery (or frame ground). Then touch the two jumper wires on the Orange wire terminal and the Green/Red wire terminal inside the wiring harness half of that connector momentarily. The shift motor should attempt to make a shift, either a shift up or a shift down. Swap the jumper leads on those same two terminals inside the 5p connector and the shift motor should attempt to shift the opposite (up or down) direction. Remove those two jumper wires from the battery. Let us know the results of those tests.

You misspelled boobs. It's not spelled shoes.

Diff times for sure. I watch those shows on WWII & older wars a lot. This pic i found a few years ago i thought was interesting as its the Japanese view of it happening. Funny how the times have changed & now we can see how it was from both the Nazi's & Japs POV,

I would prefer an oem fix. But the sensor I got from Honda seems defective, correct me if I’m wrong. I don’t get any resistance between pin 1 to 3 and 5 VDC dont change when I turn the sensor. I can get a new sensor in 2-3 weeks. I made a post and didn’t get much help unfortunately, I can wait, i bought this quad for my kids. I would prefer an oem fix 100%.

This ain’t the one for sale but there’s one with a kx instead of a cr motor for sale they wanting $200 it’s death on wheels but a good deal

I read a story that said the shot fired at the tractor went into the cab and came within inches of hitting the driver. Dutch police shoot at tractor during night of farm protests | Fox News Netherlands reportedly set to forcibly close 3,000 farms to comply with EU mandate | Fox News

No , never drank a beer in sub-zero temperature , personally never been in sub-zero temperature , and don't ever plan to be , LOL

Certainly not ideal. Short run times will exacerbate condensation problems in the crankcase though. I'd run it longer. Get a cooler, put some beer in there, and ride around for awhile. Problem solved.👍

However, he added, he and his shipmates were told that Japan would announce a declaration of war before the attack to warn people. It wasnt for more than 20 years that he learned the people he attacked were not aware they were at war. Such warning was essential, he added, under Japans warrior code, called bushido, which emphasizes honor and virtue among warriors and condemns surprise attacks and unfair battles. https://www.stripes.com/news/pearl-harbor-pilot-says-infamous-attack-dishonored-japan-1.36553 You find other Japanese pilots who seem to counter this opinion, and say that they were relieved to find the Americans caught completely by surprise. Either way, the politician scumbags were responsible for all of it.

Good to know! For the old 350's we haven't had anyone come up with a decent aftermarket CDI. Rick's makes a great aftermarket TRX300 CDI, but nothing for the 350's. Of course, with the 350's there are three different CDI's/Electrical systems 86-87 350A 87 350D 88-up 350D Obviously the 87 is the year you really have to watch as there are two different CDI's and they are not interchangeable! Link added to the supplier you mentioned. Have you used yours long? https://www.regulatorrectifier.com/catalog/1988-1989-honda-trx350d-trx-350d-fourtrax-4x4-cdi-ignition-unit

Yep! its Exactly the same here.....looks like they would get you for the same standards as a car or light duty pickemup truck turn,parking plate, brake, head, just what the vehicls come factory with, the standard should be the same for all of them ..... Now i can see anyone with blues being nailed.... But i think that's nation wide ? And might even fall under federal law .... I know for the longest time back in the day movies /shows made with police cars couldn't use blue lights just red amber and white.... Now you see blue....heck if Hollywood can get away with that .... well..... I don't see it as right...

Glad it was a simple fix. Stick around!

There are some insane people in this world!

I did know that, absolutely sickening. There is another privately funded coalition that I can't imagine he's not part of called The Great Plains Ecotourism Coalition. Their goal is to bring back the great plains to their original status, bringing Buffalo back to it original population. That means doing away with cattle ranchers. It has started uo here in Montana, they are coming in and buying up the leases on state and National forest property that cattle ranchers have had for decades to graze their cattle, and shutting that down. The goal is to put Buffalo in place of the cattle. Their argument is that cattle are too destructive to the earth and are destroying the eco system. We go riding in the mountains all the time where ranchers run their cattle on forest service property. We have not seen any destruction of any kind. They replace them with Buffalo and we're going to see people getting attacked in the campgrounds and out on the trails. They are not a passive animal. Every year people in Yellowstone Park are attacked and injured because they get too close to the Buffalo and "their space". That starts happening and it will give the forest service reasons to shut things down. That is their goal to control nature, these wealthy people are pure evil for our world!

Ain't this meme the truth , it is full assault on children

Got some dirt on it but not very bent up I can get some pics later and $25 if you want it

I sold my 2001 YZ 250 a few days ago. It wasn't the best bike for me at my age. This 2013 KTM 200 XCW should be more appropriate. Light as a 125, much newer design, made for offroad and much better steering. Has a stator that supports aftermarket lights. Six speed etc...

Hey Jack, welcome, just got back from Oregon a couple weeks ago. Took a week and spent some time on the coast. Some beautiful areas.

Meet Brittney Griner & Marine Paul Whelan. Both Americans. Both were convicted in Russian courts on dubious charges. Both serving multi-year sentences in Russian prison. Brittney hates America Paul served America Guess which one Biden traded a terrorist to free?

You know what is messed up with having a lot of lights , down here DOTD says , if the light is on the truck it needs to work , so if one is out they can give a ticket