Melatv

In this part of the country in winter and spring we are pushing ice flows on large water ways on roads, trails and streams -- fan stays on without any problems -- never heard anyone cracking a engine case -- this goes on every year.

Hi: Big Welcome Here

Do you have a Torque Wrench that reads Inch lbs. 7x 12 = 84 " lbs

Lot of saws will leak oil if stored in sheds that get vary hot inside -- it pays not to fill the oil to the top.

Check to be sure there is not 2 cones in there or something else

Hi: Big Welcome Here

Hi: Did the new bearing come with the cone also?

Hi; Did you remove the old tapper bearing cone?

Hi: It will shift 1-2-3 in ESP -- could be bad connectors -- Shift drum position switch -- speed switches Will not shift in Auto -- could be bad connectors -- Hydraulic problem -- solenoid not getting power -- low oil -- speed switches No magic here -- just check things out

Hi: I have a TRX420 FPA --- part # 31710-H5-651 Rectifier RECTIFIER ASSY. (31710-HP5-651) | MotoSport

Hi: Dose you bike have power steering?

Hi: Big Welcome Here

Hi Fish: Will miss you my friend -- Look after yourself thanks Mel

Hi: Big Welcome Here

Still going over the wiring diagram as well -- Retro we need to have this bike to solve the problem.

Hi Retro: I may have missed reading if you had Bossdaddy jumper the Shift Up & Dn buttons when everything was plug in --- I seen where it was tested with 12 VDC with ECM out.

HI Retro --- I have gone through this thread a couple of times now -- going step by step -- over and over the wiring diagram -- going through all your steps --- its like trying to win the Loto

Hi Wilson --- take care

Yes fish 3 terminal Diode -- I was taking it that he was doing it right.

Hi: The test for the diode is good -- when you are checking the fuses are you checking each gray dot on the fuse with the black meter test lead on the neg. of battery?

1 for 2001

Hi: Remove the cover off the fuse box --- use you meter or test light -- turn key on -- leave the fuses in place -- you will see a little gray dot on the top of the fuses test each dot for 12VDC.

???? parts are good on one bike -- then put the same parts on other bike -- if it does not shift, then one one of these parts is bad ????

Hi Retro: We didn't have Bossdaddy jumper the Key switch -- all 4 wires -- I had to replace Key switches on two TRX420's do to high resistance -- they are poorly built key switches. Haven't left anyone in the woods -- always got them home 🙂

Okay -- now we know that the speed sensor is not needed to shift. --- You are 73 and I am going on 78 -- I am not giving up on this bike --- Retro jump in here