General Chat

Ok got back at it today. Checked compression and came back at 25 so low. Adjusted valves to .006 on intake side and .009 on exhaust side and still running rough. Took off the head to inspect the rods and both are good and nothing is loose or out of place. Got it to run again here is a video. At this point I’m thinking maybe the tensioner?  I’m going to take this as far as it leads me, so I’ll do some more research and maybe plan to take the top end off to dig some more.  IMG_7521.mov IMG_7520.mov

OK got oem master cylinder on a 2006 honda rancher 350 fe still no pressure tried old school brake pump 20 x and lossen bleeder did that for an hour no change tried a manual vacuum pump did that for 30 min each side only front brakes on this rear brakes are mechanical but still no change no leaks I can see in the lines no drips anywhere I can see could the brake cylinders be the problem . The only way I get alil pressure is pump really fast I get some pressure and I let go all bit it's gone I did that too trying to bleed the brakes as well any help or ideas?

Got everything on and running. Noticeable difference doesn't seem to be running lean.  I'm going to be easy on it for a little while let it all break in then see what she really does. I do have a spare 02 delete I can put on maybe it does something with the setup idk but she's back up and going strong

i recently purchased a 2000 foreman 450 ES and the old cluster didn’t work so the seller gave me one he purchased used offline. the atv he said  only had less than 1600 miles on it and the new one has 8000. can it be reprogrammed to change miles to1600 or no. thanks. 

@bcsman yes saws right off the shelf or out of the box - like you said they need to be set a tad richer to run right